A classic hull is, in my opinion, one of the most fascinating and complex designs in the history of surfing. Hulls are not easy to ride—especially if you’re coming off a modern surfboard. Surfing a hull requires you to set your trajectory well in advance and with precision. Misjudge it, and you’ll find yourself in the wrong spot, at the wrong speed, unable to shift its momentum.
That being said, when your mind is tuned in and a long point break lines up in front of you, it opens the door to a whole other dimension of nearly psychotropic enjoyment.The acceleration of a hull is smooth yet exponential. As the board enters the hollow section of the wave, its bottom contour makes it lift and surge forward, while in the flatter sections it begins to sink and lose speed. The challenge is keeping it flowing—carving your lines in anticipation to pull the board back into the pocket and ride a rollercoaster of acceleration and deceleration.
The secret behind this hydrodynamic behavior lies in its unique design features: thin, pinched rails, a deep belly through the front third, a very low tail rocker, and an S-deck. The board’s volume shifts from sitting entirely below the rail line in the nose to above it in the tail—and that’s what makes it feel so unique.
This is not an everyday board. It calls for quality surf—chest-high and up, with a moderately steep face—so you can draw out long, high-speed trim lines
.
BOTTOM: Rolled belly to flat
RAIL: 50/50 Slim & Pinched
WAVE SIZE: Waist high to Overhead
SKILL LEVEL: Advanced
STANDARD MEASURES:
Whatever: from around 6’ up to 8’
LITRAGE IS APROXIMATED AS ALL BOARDS ARE HANDSHAPED.
CUSTOM MEASURES CAN BE MADE.
back to mid-lengths